Charging Station Information

Activation With T30 or T40 Remote:

1. Plug RC into the USB-C port on the back of the charger
   1. Has to be inserted into USB-A on controller. 
   2. The charger SHOULD NOT be plugged into the wall OR a battery for activation.
2. From the home screen of the Agras App select the drone icon at the top of the screen.
3. Next, select activate under the charging devices tab and your charging station should be activated.

Requirements:

1. 12000 running watt generator (9500 will bog down more frequently)
2. 50 Amp 240V Outlet (to fast charge)
3. 50 Hz electrical frequency
4. DO NOT use a dual fuel generator or Generac 15000

Charging Information:

1. Both outlets from the back of the charger need to be connected to a 240V outlet in order to fast charge batteries.
2. Fast charging should take roughly 10-12 minutes
3. Slow charging will take roughly 20 minutes
4. Charging a battery from 0-40% will take longer and 90-100% will take longer as to not damage the lithium battery cells within the battery.

Common Issues:

1. Incorrect Firmware
   1. Having the wrong firmware on your charger can stop you from fast charging batteries or even not charging at all. 
   2. See activation and updating guide linked below.
2. Generator Incompatibility
   1. Having a generator that meets the standards above is necessary to fast charge.
3. Power Supply Failure
   1. If a power supply goes bad the charger will only slow charge and will not be powered on by one of the power supplies.
   2. See Charging Station Slow Charging linked below