Drone Linking Issue

Drone will not link to controller

Cause:

1. If you crashed aircraft into high voltage power lines please contact Agri Spray Drones
2. Faulty firmware
3. Issue with RC or Battery
4. Issue with a Module on drone

Diagnosing:

1. Make sure you are properly doing the linking process, hit the drone icon, RC, and then link aircraft. Once your remote is beeping, hold down the power button on the battery until it links. 
   1. It should start the process of the lights chasing themselves.
2. If it does not go into the sequence of it chasing the lights while holding, try a different battery. 
3. If lights start to chase each other but will not link try a different controller or try downgrading firmwares on aircraft and RC.
4. Check for breaks in your sdr cable at the end of the arm or the connection to the RF board under front cover. 

Solutions:

1. Try a different battery
2. Downgrade and Reupdate Firmware
3. Replace SDR antenna
4. If battery still wont link contact Agri Spray Tech Support
5. Aerial Electronic Module or RF module could be the next step. 

Conclusion:

This can either be a very simple fix or a more complicated fix. If a simple fix does not work please contact us.