Upgrade Error Codes

When going to upgrade your aircraft, if it fails you can look into the error codes and see what the cause of the error is.

Cause:

1. This usually happens if a drone has been crashed and put back together and shows it needs an update and then the update fails.
   1. It means a module, motor, radar, or something on the spray system is damaged and can’t be updated.

Diagnosing:

1. When an update fails, click on aircraft info, and scroll down to Aircraft Firmware Version and type that ten times. 
   1. It will pull up with several codes that will say null. Look through the picture below for what error code it could be throwing.
      1. Some if the spreader tank or the spray tank is not plugged in it will throw null codes for that.

Solutions:

1. Look through the error code picture below, and whatever code it gives, replace that part.

Conclusion:

If you are ever updating an aircraft and it fails it could be for a few reasons. It could be because of a bad internet connection, battery life on the controller or drone isn’t over 50% or there is a damaged piece on the aircraft that can not update. Look for where the error is by checking null codes. 

Media and Links