When going to upgrade your aircraft, if it fails you can look into the error codes and see what the cause of the error is.
Cause:
- This usually happens if a drone has been crashed and put back together and shows it needs an update and then the update fails.
- It means a module, motor, radar, or something on the spray system is damaged and can’t be updated.
Diagnosing:
- When an update fails, click on aircraft info, and scroll down to Aircraft Firmware Version and type that ten times.
- It will pull up with several codes that will say null. Look through the picture below for what error code it could be throwing.
- Some if the spreader tank or the spray tank is not plugged in it will through null codes for that.
- It will pull up with several codes that will say null. Look through the picture below for what error code it could be throwing.
Solutions:
- Look through the error code picture below, and whatever code it gives, replace that part.
Conclusion:
If you are ever updating an aircraft and it fails it could be for a few reasons. It could be because of a bad internet connection, battery life on the controller or drone isn’t over 50% or their is a damaged piece on the aircraft that can not update. Look for what error code it could say by it saying null.
Media and Links