Dock 2 Step by Step Activation with the Matrice 3TD/3D
Steps:
1. Ensure power and ethernet connections are hooked up.
2. Turn on power switches and check for proper lighting.
3. Connect the USB-C to USB-A cable to the dock.
4. Power up the controller and open the dock cover.
5. Release emergency stop buttons and ensure the protective earth wire is connected.
6. Check that power and network cables are connected, and switches are turned on.
7. Verify wind gauges are properly installed.
8. Read and agree to the terms of use, add device information, and enter necessary details.
9. Set network security mode to standard and toggle all required settings.
10. Complete the activation process and connect to the aircraft.
11. Follow instructions for linking and activating the drone.
12. Perform manual calibration if needed, adjusting settings as required.
13. Set an alternative landing spot and safe return to home height.
14. Place the aircraft back on the dock once activation is complete.
15. Log into the cloud service, enter organization ID, binding code, and dock name on the computer.
16. Complete device binding on Flight Hub 2.
- Ensure all connections are secure and properly grounded.
- Follow instructions carefully to avoid errors in activation.
- Double-check settings and configurations before proceeding.
- Take your time to ensure each step is completed accurately.
- Seek assistance or clarification if any step is unclear.
Products:
https://agrispraydrones.com/products/matrice-3td-dock-combo?_pos=2&_psq=dock+2&_ss=e&_v=1.0