HD 408 AutoSteer Signal Lost and Won’t Reconnect

The most likely causes of a dropped signal are obstacle or signal interference. In the event that the system loses connection review this checklist.

1. Drive to an open area that is free of nearby obstacles. Do not move the tractor during the connection process. 
   
   
2. When trying to reconnect, go into the Radio station / GNSS tab. Select the correction method you would like to use (E6-Has for GNSS). 
   
   
3. Select “RESET GNSS” in the bottom right hand corner. 
   
   
4. Press “OK”. This will reset the signal for a new connection. 
   
   
5. 10-15 minutes is the normal wait time to reach a “FIXED” RTK state
   
   
6. Continue normal operation

See this manual link for more information on connecting to a correction source:

HD408 Auto Steer Signal Source Configuration

See this article for more on reaching a “FIXED” RTK state:

How to reach "FIXED" RTK state - HD408 Auto Steer