How To Link The EAV J100 To The Remote Controller

To successfully link the J100 drone to the controller for seamless operation.

Locate the linking button on the controller, found on the left side of the screen above the joystick.
Press and hold the linking button until it starts flashing red and green.
Remove the front cover of the J100 drone.
Press the button with chain links symbol on the J100 drone once. The center will start flashing blue, indicating it is in pairing mode.
Wait for the drone to be linked to the controller. A picture of the drone will appear on the controller screen when successfully linked and the flashing green/red linking button on the RC will turn solid green.

Ensure that both the controller and the J100 drone have sufficient battery power before attempting to link them.
Do not force any buttons or covers, follow the instructions carefully to avoid damaging any components.

Keep the controller and the J100 drone within close proximity during the linking process for better connectivity. It is best to not be directly beside the drone during linking process but stand 6ft away from the drone.
If the drone does not link immediately, be patient and wait for a few minutes for the connection to establish.