Simple into to the basics with the Max4T
Standard Operating Procedure for Operating the Autel Evo Max 4T Drone
Created: August 1, 2025
Objective
This SOP outlines the procedures for safely and effectively operating the Autel Evo Max 4T drone, ensuring optimal performance and flight safety.
Key Steps
1. Unboxing and Setup
Watch at 0:06
-
Open the Pelican case and remove the drone and accessories.
-
Ensure all protective plastic is removed from the propellers.
-
Verify the kit includes at least one battery and the large remote controller.
2. Battery Management
Watch at 0:34
-
Purchase two additional batteries (for a total of three) to extend operation time.
-
Each battery provides approximately 40 minutes of flight.
-
Use hot-swapping to reduce downtime between flights.
3. Preparing the Drone for Flight
Watch at 3:41
-
Spread the propellers out fully before powering on to avoid motor stress.
-
Place the drone on a flat surface for proper calibration and balance.
4. Inserting the Battery
Watch at 4:40
-
Insert the battery until it clicks into place securely.
-
Ensure the connectors face downward and are properly aligned.
5. Powering On the Drone
Watch at 5:19
-
Press and hold the power button until the lights flash to turn on the drone.
6. Remote Control Setup
Watch at 5:55
-
Power on the remote and confirm connection with the drone.
-
Review remote interface layout and customize settings if needed.
7. Camera Settings
Watch at 8:18
-
Set resolution to 48 MP for high-quality images.
-
Adjust contrast and brightness based on lighting conditions.
8. Flight Operations
Watch at 10:06
-
Ascend above nearby obstacles before navigating.
-
Control direction and altitude via the remote.
9. Utilizing Recognition Features
Watch at 12:06
-
Enable object recognition for intelligent subject tracking.
-
Use Tripod Mode for steady focus on dynamic objects.
10. Thermal Imaging and Split-Screen
Watch at 15:04
-
Activate split-screen to view both thermal and RGB feeds.
-
Adjust settings based on mission or inspection needs.
11. Mission Planning
Watch at 19:40
-
Choose mission parameters (polygon scan, zoom path, etc.).
-
Set altitude, speed, and coverage preferences.
12. Safe Landing Procedures
Watch at 21:30
-
Use the “Return to Home” function to initiate auto-landing.
-
Watch descent and manually intervene if needed.
Cautionary Notes
-
Always verify local drone flight regulations.
-
Inspect the drone before every use.
-
Do not operate in strong winds, rain, or near hazards.
Tips for Efficiency
-
Keep spare batteries charged and accessible.
-
Learn your remote settings to fly more effectively.
-
Regularly check for firmware/software updates.