Tutorials
      Back to home
      1. ASD Knowledge Hub
      2. EAV J100
      3. Tutorials

      J100 How to Disassemble the Remote Controller (RC)

      This article outlines the step-by-step process for disassembling and reassembling a J100 controller to ensure accuracy and efficiency in task execution.

       Disassembling and Reassembling a J100 Remote Controller (RC)

      Click Here for new J100 RC 

      Key Steps

      Step 1: Gather Tools 0:01

      • Tools Required:

        • Phillips screwdriver

        • Pry tool

        • Silicone (for reassembly)

        • J100 controller

       

      Step 2: Remove Sticks 0:10

      • Unscrew the two sticks from the controller.

      • Place the controller upside down on a soft surface.

       

      Step 3: Remove Grips 0:45

      • Use the pry tool to gently lift the grips off the controller.

      • Repeat on the opposite side.

       

      Step 4: Remove Mesh Covers 1:08

      • Pry off the mesh covers using the pry tool.

      • Start at the edges for easier removal.

       

      Step 5: Unscrew the Controller 1:08

      • Use the Phillips screwdriver to remove all visible screws.

      • Important: Check under the sticker for a hidden screw.

       

      Step 6: Separate the Controller Halves 4:47

      • Gently turn the controller over and allow some parts to drop out.

      • If it doesn’t separate easily, check for any remaining screws.

       

      Step 7: Access Internal Components 5:18

      • Carefully pull apart the two halves of the controller to access internal components.

       

      Step 8: Reassemble the Controller 5:29

      • Tuck all cables in to avoid pinching.

      • Press the two halves back together.

       

      Step 9: Insert Screws 6:03

      • Use smaller screws in designated spots.

      • Use larger screws with rubber seals for the remaining holes.

       

      Step 10: Reattach Mesh Covers 9:13

      • Position mesh covers on tabs and press until they click into place.

       

      Step 11: Apply Silicone for Grips 9:57

      • Apply a bead of silicone around the edges of the grips.

      • Place grips back on the controller and press down lightly.

       

      Step 12: Reattach Sticks 11:03

      • Screw the smaller stick piece back on first (thicker side up).

      • Repeat for the other side.

      Cautionary Notes

      • Always ensure that all screws are removed before attempting to pull apart the controller.

      • Be gentle when using the pry tool to avoid damaging the controller.

      Tips for Efficiency

      • Work in a well-lit area to easily see screws and components.

      • Organize screws by type to avoid confusion during reassembly.

      • Take pictures during disassembly to reference during reassembly.

       

      Stay Informed: Subscribe to the Agri Spray Drones Newsletter

       How to Subscribe

      Subscribing is easy and takes less than a minute:

      1. Visit Our Website
        Go to www.agrispraydrones.com 

      2. Scroll to the Bottom of the Homepage
        Look for the “Subscribe to Our Newsletter” section.

      3. Enter Your Email Address
        Type in the email address where you'd like to receive updates.

      4. Click “Subscribe”
        Once you submit, you’ll be added to our mailing list and will start receiving valuable updates straight to your inbox.

      Don’t Miss Out

      Join thousands of ag professionals who trust Agri Spray Drones for the latest in drone spraying and precision ag.
      Subscribe today — and let us help you take your operation to the next level.