This article outlines the step by step process to connect the charger to the J-150 remote controller and monitor battery status effectively.
Connecting Charger to J-150 Remote
Key Steps
1. Charger Overview
-
Ensure the charger is plugged in.
-
Check battery status indicator (yellow means battery is not in).
-
Plug the battery into the charger to test; a solid green light indicates a full charge.
2. Fan Settings Configuration on Charger
-
Adjust fan settings:
-
Off: Fans are off.
-
Auto: Fans run only when charging (recommended).
-
On: Fans run continuously.
Use Auto or On when battery is in charger to prevent battery overheating.
-
3. Bluetooth Connection Setup
-
Swipe down from the top of the screen on your remote.
-
Ensure Bluetooth is enabled in system settings.
-
Navigate to the device settings on the left-hand side.
-
Scroll down and select 'Charger', and click 'Connect'.
4. Connecting to Charger from Mission Screen
-
If in mission screen, click the drone icon at the top.
-
Go to device settings, scroll to 'Charger', and click 'Connect'.
-
Wait for the scan to complete and select the charger by its serial number.
5. Firmware Updates and Power Settings
-
After connecting, check for firmware updates by clicking 'Upgrade'.
-
Adjust power settings between 1000 to 12,400 watts based on generator capacity.
6. Monitoring Charger and Battery Information
-
Access detailed battery information:
-
Cell voltages
-
Battery percentage
-
Firmware version
-
Fault and warning information.
-
7. Battery Status of The Battery Charging During Operation
-
Monitor battery status from the top of the operation screen.
-
A green check mark indicates battery status in the charger, or a percentage will be displayed of the battery in charger current level.
-
The percentage will update as the battery charges.
8. Efficient Battery Management
-
EA recommends pulling batteries at 95% charge or above.
-
Pulling at 99% can save time during charging cycles.
Cautionary Notes
-
Always ensure the charger is properly connected before attempting to charge.
-
Monitor the temperature of the charger to avoid overheating.
Tips for Efficiency
-
Use the Bluetooth connection to monitor battery status in real-time.
-
Set fans to 'Auto' to maintain optimal battery temperature during charging.
Stay Informed: Subscribe to the Agri Spray Drones Newsletter
How to Subscribe
Subscribing is easy and takes less than a minute:
-
Visit Our Website
Go to www.agrispraydrones.com -
Scroll to the Bottom of the Homepage
Look for the “Subscribe to Our Newsletter” section. -
Enter Your Email Address
Type in the email address where you'd like to receive updates. -
Click “Subscribe”
Once you submit, you’ll be added to our mailing list and will start receiving valuable updates straight to your inbox.
Don’t Miss Out
Join thousands of ag professionals who trust Agri Spray Drones for the latest in drone spraying and precision ag.
Subscribe today — and let us help you take your operation to the next level.