Getting started/ Additional information
  1. ASD Knowledge Hub
  2. EAV J150 & J70
  3. Getting started/ Additional information

J150 How To Wire Your Charger

This article outlines the steps to wire your J150 Charger using a 30-amp plug, ensuring proper connections for safe operation and use.

Charger Wiring Procedure on your J150 Charger

Key Steps for Wiring the J150 Charger.

 

1. Gather Materials

  • Obtain the charger with an 8-foot lead and two big blue ends.

  • Ensure you have the smaller adapters for the blue ends.

PXL_20250904_164145639PXL_20250904_164055101

2. Identify Wires

  • Locate the wires on the adapter: brown, blue, and yellow-green.

  • Remember: yellow-green is ground, brown and blue are hot wires.

56b37f9319be49d5adeb0db205d37397

3. Prepare the 30-Amp Plug

  • Remove the face of the 30-amp plug to access the prongs.

 

4. Understand Plug Configuration

  • Identify the prongs:

    • L-shaped prong is ground (green screw).

    • Two larger prongs are hot (gold screws).

    • Do not use the smaller top prong (neutral).

674b59eac3b44a8c8d9fb7b959c244c4

5. Wire the Ground Connection

  • Feed the green/yellow wire into the ground port of the plug.

  • Tighten the set screw to secure the connection.

 

6. Wire the Hot Connections

  • Insert one of the hot wires into one of the hot ports and tighten.

  • Repeat for the second hot wire. 

7d182ac239c243ec8df161cd73d763ef

7. Check Connections

  • Ensure the connections are secure: ground, hot, hot. and nothing on the neutral 

 

8. Assemble the Plug

  • Slide the collar up through the wires and align screw holes.

  • Secure the collar and replace the top screws.

459bbcd279964bd99147f4f0aa500b0f

9. Finalize Wiring

  • Optionally, trim wire ends for a better fit or use electrical tape for insulation.

 

10. Connect to Generator

  • Insert the adapters into the plug, ensuring the larger pin (ground) is aligned.

  • Plug the charger into the generator.

    72bab2245b7542808a5ef6c21b62d3c9

Cautionary Notes

  • Always ensure the power is off before starting the wiring process.

  • Double-check all connections to avoid short circuits or electrical hazards.

Tips for Efficiency

  • Organize your workspace to have all tools and materials within reach.

  • Label wires if necessary to avoid confusion during the wiring process.

 

Stay Informed: Subscribe to the Agri Spray Drones Newsletter

How to Subscribe

Subscribing is easy and takes less than a minute:

  1. Visit Our Website
    Go to www.agrispraydrones.com

  2. Scroll to the Bottom of the Homepage
    Look for the “Subscribe to Our Newsletter” section.

  3. Enter Your Email Address
    Type in the email address where you'd like to receive updates.

  4. Click “Subscribe”
    Once you submit, you’ll be added to our mailing list and will start receiving valuable updates straight to your inbox.

Don’t Miss Out

Join thousands of ag professionals who trust Agri Spray Drones for the latest in drone spraying and precision ag.
Subscribe today — and let us help you take your operation to the next level.