J150 Spray Tank Not Recognized

This article provides the steps to guide you to fixing the issue of your J150 not reading or recognizing the Spray Tank after previously using the Spreader Tank.

If your J150 is not reading or recognizing your Spray Tank after previously having the Spreader Tank connected, try the steps below:

Step 1. Unplug and remove your spray tank.

Step 2. Plug your spreader tank back into the J150.

Step 3. Fully shut down your drone (internal and external battery).

Click Here for the article on fully shutting down the J150

Step 4. Once the drone has finished shutting down, unplug and remove the spreader tank.

Step 5. With the spreader tank removed, reinsert and plug in the spray tank.

Step 6. Power on your J150 and confirm that the Spray Tank is recognized.

(Your issue should now be resolved.)

• If the issue persists, check the spray tank connections, ensuring they are fully seated on the tank side and also the CPU side.
• Check the cables for any damage. (If damage is found, the damaged cable will need to be replaced.)

Click Here for a J150 Spray Tank Assembly

Stay Informed: Subscribe to the Agri Spray Drones Newsletter

How to Subscribe

Subscribing is easy and takes less than a minute:

1. Visit Our Website
   Go to www.agrispraydrones.com

2. Scroll to the Bottom of the Homepage
   Look for the “Subscribe to Our Newsletter” section.

3. Enter Your Email Address
   Type in the email address where you'd like to receive updates.

4. Click “Subscribe”
   Once you submit, you’ll be added to our mailing list and will start receiving valuable updates straight to your inbox.

Don’t Miss Out

Join thousands of ag professionals who trust Agri Spray Drones for the latest in drone spraying and precision ag.
Subscribe today — and let us help you take your operation to the next level.