Arm Connector Inspection for the DJI Agras T50 Drone

Inspecting Aircraft Arm Connector for the Agras T50

1. Purpose of Inspection

   • Ensure the aircraft arm connector is in good condition.

   • Prevent premature failure of the part.

2. Visual Inspection

   • Look for dense, dings, or damage on the arm connector.

3. Using a Digital Force Meter

   • Set the meter to peak and Newton's.

   • Hook it onto the aircraft arm connector.

   • Check the reading (e.g., 92.4 Newtons).

   • Specified tolerance: 80 Newtons +/- 10.

4. Adjustment if Out of Spec

   • Adjust the connector if the reading is out of spec by turning the connection rod.

   • Ensure it falls within the specified tolerance.

5. Inspection Process

   • Start with M1 and inspect all connectors around the aircraft.

   • Recommended inspection frequency: every month.

6. Replacement Period

   • Aircraft arm connector replacement period: 700 hours of flight.