Filter Inspection of the DJI Agras T50 Drone

Inspecting Filters of the Agras T50

1. Removing the Top Filter

   • Locate the filter on the top of the tank.

   • Check if the filter is missing or needs replacement.

   • Clean the filter and set aside.

2. Checking the Inner Tank Filter

   • Identify the filter inside the tank near the outlet at the bottom.

   • Ensure it is not clogged with particles.

   • Clean or replace the tank filter if necessary.

3. Replacing Filters

   • DJI recommends replacing spray filters after 700 flight hours.

   • Replace any damaged filters found during inspection.

   • This is daily maintenance for the T50.