Flow Meter Inspection for the DJI Agras T50 Drone

Inspecting the Flow Meter of the Agras T50

1. Physical Module Check:

   • Look for damage on the module and cords.

   • Ensure cords are in good shape and not corroded.

2. Testing Procedure:

   • Install the module back in the aircraft.

   • Run water through the flow meter.

   • Fill the spray tank with one liter of water.

   • Perform a flow meter calibration.

3. Maintenance Schedule:

   • DJI recommends replacing the flow meter after 700 hours of flight.

   • Monthly inspection of the flow meter to ensure proper functioning.