Hose Inspection for the DJI Agras T50 Drone

Inspecting Hoses of the Agras T50

1. Start Inspection

   • Begin from the frame of the aircraft.

   • Work your way out each arm.

2. Inspect Rear Arms

   • If spring kit installed, repeat for all four arms.

   • Otherwise, inspect the two rear arms.

   • Check for kinks or damage where the hose bends.

3. Inspect End of Arms

   • Check the 180-degree bend for potential cracks.

   • Inspect the hose going into the spray rod for kinks, especially near the motor.

4. Inspect Back of Tank

   • Check hoses at the back of the tank.

   • Ensure hoses are undamaged and not kinked.

5. Maintenance Schedule

   • DJI recommends replacing hoses after 700 flight hours.

   • This is part of the monthly inspection cycle.