Impeller Pump Module Inspection for the DJI Agras T50 Drone

Inspecting the Impeller Pump Module

1. Disconnecting the Module

   • Ensure complete disconnection from the motor.

2. Cleaning Process

   • Run water through the module from the inlet to the outlet.

   • Twist and disconnect for thorough cleaning, especially the impellers.

3. Checking Seals

   • Verify the seals are in good condition.

4. Reassembly

   • Align arrows when putting the module back together.

5. Maintenance Reminder

   • Run 3-4 full tanks of water after each day of drone use.

   • Thoroughly rinse to prevent build-up of contaminants.

6. Maintenance Schedule

   • DJI suggests replacing the impeller pump module at 700 flight hours.

   • This is part of the monthly inspection.