Landing Gear Inspection for the DJI Agras T50 Drone

Inspecting T50 Landing Gear

1. Initial Checks

   • Shake the drone to ensure it is level.

   • Inspect aluminum tubes for dents, dings, or damage.

2. Checking Y-Tee Parts

   • Ensure parts are not cracked, damaged, or out of place.

   • Verify that the crossbeam is level.

3. Radar Alignment

   • Ensure the radar is perpendicular to the ground.

   • Misalignment can cause terrain following and obstacle avoidance issues.

4. Additional Checks

   • Inspect the crossbeam for damage and cracks.

   • Verify radar alignment on both ends.

5. Fixing Pieces Inspection

   • Check for cracks in fixing pieces.

   • Ensure proper attachment to the frame.

6. Final Verification

   • Lightly push up and down on the drone to check for play or movement in the landing gear.

   • Repeat the check on each side.

7. Replacement Period

   • The replacement period for T50 landing gear is 700 hours of flight.

   • Monthly Maintenance

 

Link to Loom

https://www.loom.com/share/b0e9ecf32c1d465b9b758d0125124b74