Propulsion System Screw Inspection for the DJI Agras T50 Drone

Inspecting Propulsion System Screws on the Agras T50

1. Check Prop Screws

   • Set torque wrench to 17 inch-pounds.

   • Ensure blue lock tight is applied.

   • Torque prop screws to 17 inch-pounds.

   • Check and re-torque multiple times to prevent loosening.

2. Motor Mount Screws

   • Use 4mm hex socket set to 40 inch-pounds.

   • Torque screws in motor mount from motor and through arm.

   • Ensure all screws are torqued to 40 inch-pounds.

3. Maintenance Recommendation

   • DJI suggests replacing motor mount screws and prop screws at 700 flight hours.

   • Part of monthly maintenance.