Radar Inspection for the DJI Agras T50 Drone

Annual Inspection of Radar Modules on Agras T50 Drone

1. Purpose: Inspect radar modules monthly for physical damage and ensure proper functionality.

2. Physical Inspection:

   • Check front and rear radar modules for exterior damage like cracks or dings.

3. Power Cycling:

   • Power cycle the drone and wait for radar modules to boot up.

   • Verify proper functioning by feeling slight vibrations as the radar spins.

4. Front Radar Module Inspection:

   • Open the front cover and unplug the radar module.

   • Check for corrosion, scorching, or damage on the cable and plug.

   • Inspect the entire cable for frayed wires before reattaching.

5. Rear Radar Module Inspection:

   • Repeat the same process for the rear radar module.

   • Check for scorching, corrosion, or pesticide buildup.

   • Ensure the cable is undamaged up to where it plugs into the board.

6. Maintenance Recommendation:

   • DJI recommends replacing radar modules after 700 hours of flight.