SDR Antenna Inspection of the DJI Agras T50 Drone

Inspecting the SDR Antenna on T50 Aircraft

1. Connecting the SDR Antenna

   • Connect the pink cables labeled SDR antennas from the RF module to the blue cables on the aircraft.

   • One cable has a black plug, the other has a white plug.

   • Match the white plug with the white connection and the black plug with the black connection.

   • Tighten the connections by hand and then give them an extra eighth of a turn using pliers.

2. Routing the Cables

   • Long cables from the RF module go to the opposite side of the aircraft.

   • Short cables go to the closer side of the RF module.

3. Physical Inspection of SDR Antennas and Cables

   • Inspect the SDR antennas and cables for any damage.

   • Ensure antennas fit back properly, cables are in good shape, and have not been pulled, stretched, bent, or kinked.

   • Check the cable connection to the frame.

4. Maintenance Recommendation

   • Replace SDR antennas every 700 flight hours.

   • This is part of the monthly inspection process.