Spray System Cables Inspection of the DJI Agras T50 Drone

1. Unplug all Connections on the Tank

• Unplug the connections on the tank for the different sensors and motors.

2. Inspect Cable Ends

• Inspect the cable ends for corrosion or damage to the seals.
• Clean the cable ends if corrosion is noticed.
• Replace the cables if damage is found to pins or plugs.

3. Inspect Wires

• Inspect each individual wire for exposed wires, kinks, or other damage.
• Replace any damaged cables.

4. Inspect Connection on Drone

• Inspect the main tank connection on the drone for corrosion, plug damage, or damage to the cable.
• Replace if damage is found.

5. Maintenance Schedule

• DJI recommends replacing after 700 flight hours.
• This is part of your annual inspection.