Multi-Field Mapping with T50/T25

This article will show you how to enable multi field mapping on your T50/T25.

Objective

To efficiently create multi-field maps using the T50 drone for agricultural purposes.

Key Steps

1. Access the home page and click on "Begin" to start.

2. Proceed to create a map by setting parameters such as field spacing and margins.

3. Save the map with a designated name.

4. Select multiple fields by clicking on the three square block structure in the top right corner and enabling multitask mode.

5. Choose the fields you want to include in the map (up to 10 fields).

6. Adjust individual parameters for each field or apply the same settings to all selected fields.

7. Connect to the aircraft, set the start point, and initiate the flight.

Cautionary Notes

• Ensure that the total number of selected fields does not exceed the limit of 10.

• Verify the accuracy of parameters, especially for field size variations.

• Double-check the start point and flight path before initiating the flight.

Tips for Efficiency

• Use the multitask mode to select and apply settings to multiple fields simultaneously.

• Save time by applying the same parameters to all selected fields when appropriate.

• Prioritize accuracy by adjusting settings based on individual field requirements.