Stuck in Demo Mode - HD408 Autosteer

If your HD408 system is not responding to inputs, you may have accidentally entered demo mode.

Follow these steps to exit demo mode:

Step 1: Identify Demo Mode 0:01

• Check if your HD408 system is unresponsive or showing incorrect map data.
• Look for the following indicators:
  • Number of satellites: If it shows 60, this is unusual (average is about 30).
  • Presence of the white demo mode controls box on the bottom of the screen.

Step 2: Access Settings 0:37

• Navigate to the settings menu on your HD408 system.

Step 3: Locate Demonstration Mode 0:56

• In the settings menu, select 'System'.
• Find and select 'Demonstration Mode'.

Step 4: Exit Demo Mode 1:12

• Press 'Close Simulation' to exit demo mode.
• The system will reboot and restart the auto-steer app.

Step 5: Confirm Normal Operation 1:30

• Check that the demo mode box is gone.
• Ensure the system is now responsive to actual tractor inputs and is in operation mode.

Step 6: Understanding Demo Mode 1:37

• Note that demo mode should not be entered once the unit is installed on your tractor.