This Video and article outlines the steps required to replace the dials on T40 and T50 remotes, ensuring proper handling and assembly to avoid damage.
Key Steps
1. Disassemble the Remote 0:00
-
Watch the disassembly video to understand how to take apart the remote. Click Here for video on disassembly of T40/ T50 Remote
-
Remove the hot glue carefully to access the internal components.
2. Remove Hot Glue 0:14
-
Use pliers to strip off the hot glue that holds the board in place.
-
Be cautious as this may damage the plastic.
3. Access the Internal Mechanism 1:01
-
Carefully remove the screws using a small Phillips screwdriver.
-
Ensure not to strip the screws by applying adequate pressure.
4. Use Heat Gun 2:50
-
Heat the area with a heat gun on low to soften the remaining hot glue.
-
Work quickly to prevent the glue from hardening again.
5. Remove the Board 5:43
-
Gently pry up the board using a flathead screwdriver.
-
Be cautious of the internal components and wires.
6. Replace the Dial Arms 6:16
-
Identify the broken arm and replace it with a new one.
-
Ensure the notch on the arm is facing upwards when inserting.
7. Reassemble the Mechanism 9:02
-
Carefully reattach the spring and ensure it is secured in place.
-
Avoid damaging the spring during this process.
8. Reapply Hot Glue 10:07
-
Clean off excess hot glue to ensure a proper fit when reassembling.
-
Optionally, apply new hot glue to secure the board.
9. Reassemble the Remote 10:54
-
Replace all screws and ensure everything is functioning correctly.
-
Recalibrate the remote if necessary.
Cautionary Notes
-
Be careful when removing hot glue to avoid damaging the remote's plastic casing.
-
Avoid overheating the wires during the hot glue application to prevent damage.
Tips for Efficiency
-
Use a heat gun to soften hot glue for easier removal.
-
Organize screws and small parts to prevent loss during disassembly.
-
Watch instructional videos for visual guidance on disassembly and reassembly.
Stay Informed: Subscribe to the Agri Spray Drones Newsletter
How to Subscribe
Subscribing is easy and takes less than a minute:
-
Visit Our Website
Go to www.agrispraydrones.com -
Scroll to the Bottom of the Homepage
Look for the “Subscribe to Our Newsletter” section. -
Enter Your Email Address
Type in the email address where you'd like to receive updates. -
Click “Subscribe”
Once you submit, you’ll be added to our mailing list and will start receiving valuable updates straight to your inbox.
Don’t Miss Out
Join thousands of ag professionals who trust Agri Spray Drones for the latest in drone spraying and precision ag.
Subscribe today — and let us help you take your operation to the next level.